How To Operate - Peak PAC Auto PAC 300 Operation Manual

(4) How to Operate

a. Turn on the Main power switch (make a 90-degree clockwise turn). The front door will
be locked at the same time. [If you want to open the front door, turn off the main
power switch first (make a 90-degree counterclockwise turn). In this way, the operator
can open the front door without risk.] (See drawing below)
b. Wait for about 3 minutes until the heater element reaches its required operating
temperature.
c. Place a package in the middle of the chute.
Set tension with Tension Adjustment Knob (VR)(see page part I P11 ○
d.
Push start switch (see page part I P11 ○
e.
The strapping operation is repeated if the start switch is pushed again.
) or actuate foot pedal switch to start strapping.
1
- 18 -
)
4