HP E30 User Manual page 119

Appendix E
initialization string supplied by the manufacturer of the modem you
connected to the NetServer.
NOTE
You can modify the modem initialization string as required.
This string may have been preset by the service personnel who
call in to diagnose problems with the server remotely.
4. The HP Modem Initialization Utility also allows for a case-sensitive
password.
You can enter any alphanumeric combination up to 20 characters in the
space provided. The password you enter here will be required for remote
access to the HP NetServer.
5. Tab to OK and press Enter.
The HP Modem Initialization Utility saves the modem initialization string
and password, and informs you that initialization is about to occur.
6. Select Yes to initialize the modem. (Cancel returns you to the HP Utility
Partition's Main Menu.)
At this point, the HP NetServer E 40 awaits a call from the remote console
and is functionally disabled until a connection is made. To disable
Server Management Using HP Support Anywhere
111