Download
Share
Print this page
Dahua K Series Quick Start Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Security Camera
  5. K Series
  6. Quick start manual
Dahua K Series Quick Start Manual

Dahua K Series Quick Start Manual

Cube network camera
Hide thumbs Also See for K Series:

Advertisement

Quick Links

Download this manual See also: Quick Start Manual
Dahua K Series Cube Network Camera Quick Start Guide
V 1.0.2
Zhejiang Dahua Vision Technology CO., LTD
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the K Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dahua K Series

Summary of Contents for Dahua K Series

  • Page 1 Dahua K Series Cube Network Camera Quick Start Guide V 1.0.2 Zhejiang Dahua Vision Technology CO., LTD...

  • Page 2: Packing List

    1 Packing List Device × 1 QSG ×1 Power Adapter ×1 Screw Package ×1 Installation Position Map ×1...

  • Page 3: Product Appearance

    2 Product Appearance Figure 2-1 Figure 2-2 Figure 2-3 Please refer to the following sheet for more details about each port. Name Network port (Wireless connection mode is available as well) Reset/WPS (Wi-Fi Protected Setup) button Digital input/output （Refer to chapter 4 for connection mode） Power port Built-in speaker...
  • Page 4 Micro SD card slot Indicator light Built-in MIC IR LED PIR （Sense IR ray, trigger alarm） Sheet 2-1 Note: For reset, long press for 8 seconds and then the light off; For WPS (Wi-Fi Protected Setup), one quick press. Please refer to the following sheet for more details about status of indicator light. Indicator light status Device status Red light normally on...

  • Page 5: Operate By Easy4Ip App

    3 Operate by Easy4ip APP Step 1 Power on the device with power adapter. Step2 Connect your smart phone to your WiFi network. Scan the “Easy4ip APP” QR on the packing box, download and install the Easy4ip APP. Step3 Open Easy4ip APP (downloaded from APP Store .take IOS as an example), tap “login” to login the APP, see Figure 3-1.
  • Page 6 Figure 3-2 Step5 Tap “+” to add devices. Figure 3-3 Step6 Please select “Wired” when the network cable is connected, choose “Wireless” for wireless connection. Here is an example of wireless connection.
  • Page 7 Figure 3-4 Step7 Name the camera and scan the QR code on camera. Figure 3-5...
  • Page 8 Figure 3-6 Step8 Input the Wi-Fi password. Figure 3-7 Step 9 Wait for 60s to finish the Wi-Fi connection.
  • Page 9 Figure 3-8 Note: If you want to change the Wi-Fi signal, please reset the camera to factory default and repeat step 6-9. Figure 3-9...
  • Page 10 4 External Alarm Input/Output Device IPC supports external alarm device, it can externally connect to alarm input/output device via “Digital input/output”. 4.1.1 Alarm Input Device (detector, sensor and so on) Please refer to the following figure for alarm input information. See Figure 4-1. Alarm input: When the input signal is idle or grounded, the device can collect the different statuses of the alarm input port.
  • Page 11 Mode A: Level application. Alarm output high and low level, alarm output is OC; it needs to increase pull-up resistance externally to work normally. Max external pull-up level is 5V, max port current is 5mA. After external pull-up resistance is increased, the default of output signal is high level (external pull-up voltage), and it switches to low level when there is alarm output (when the working current is 5mA, output voltage is less than 0.8V).

  • Page 12: Device Installation

    5 Device Installation Important： Please make sure the installation surface can min support the 3X weight of the camera and the bracket. Figure 5-1 Step 1 Paste the installation map on the installation surface such as wall, ceiling or the wood. Step 2 Dig holes in the installation surface according to the installation map.
  • Page 13 If there is any uncertainty or controversy, please refer to the final explanation of us.  Please visit our website or contact your local service engineer for more information. Zhejiang Dahua Vision Technology Co., Ltd Address：No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC. Postcode: 310053...