Advertisement

Mini Network Dome Camera User's Manual
Version 4.3.1

Advertisement

Table of Contents
loading

Summary of Contents for Dahua IPC-HDB3200C Series

  • Page 1 Mini Network Dome Camera User’s Manual Version 4.3.1...
  • Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
  • Page 3: Important Safeguards And Warnings

    Important Safeguards and Warnings 1.Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect these two power supplying sources to the device at the same time;...
  • Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
  • Page 5: Table Of Contents

    Table of Contents General Introduction ......................1 Overview ........................ 1 Features ......................... 1 Specifications ......................2 1.3.1 Performance ....................2 Framework .......................... 6 Structure ......................... 6 Dimensions ......................6 Installation ........................... 9 Device Installation ....................9 Micro SD Card Installation .................. 11 Quick Configuration Tool ....................
  • Page 6: General Introduction

    1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts audio and video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera uses standard H.264 video compression technology and MJPEG audio compression technology, which maximally guarantee the audio and video quality.
  • Page 7: Specifications

     Support digital WDR.  Support system resource information and running status real-time display.  Support video watermark function to avoid vicious video modification.  Support electronic shutter and gain setup.  Support dual bit stream, support ACF. 1.3 Specifications 1.3.1 Performance Please refer to the following sheet for network camera performance specification.
  • Page 8 H.264B: 56Kbps- bit rate is adjustable. 8192Kbps. Support customized setup. MJPEG: 128Kbps- 20480Kbps, adjustable and bit rate is adjustable. Support customized setup. Support mirror function. Video Flip Support flip function. Snapshot Max 1f/s snapshot. File extension name is JPEG. Privacy Mask Supports max 4 privacy mask zones Video Setup Support parameter setup such as bright, contrast.
  • Page 9 Model IPC-HDB4100C IPC-HDB4200C IPC-HDB4300C Parameter Series Series Series Main High performance DSP Processor Embedded LINUX System Support real-time network, local record, and remote operation at the Resources same time. User Interface Remote operation interface such as WEB, DSS, PSS System Status SD card status, bit stream statistics, log, and software version.
  • Page 10 Support mirror function. Video Flip Support flip function. Snapshot Max 1f/s snapshot. File extension name is JPEG. Privacy Mask Supports max 4 privacy mask zones Interest Area Support max 4 interest areas. Video Setup Support parameter setup such as bright, contrast. Video Channel title, time title, motion detect, privacy mask, overlay.
  • Page 11: Framework

    2 Framework 2.1 Structure Please refer to the following figure for detailed information. See Figure 2-1. Figure 2-1 Structure Please refer to the following sheet for detailed structure information. Name X-Y-Z rotation module Device lens Dome camera enclosure Please refer to the following sheet for detailed port information. Name Function Connect to the DC 12+ power to...
  • Page 12 Figure 2-2 Dimension illustration 1 Figure 2-3 Dimension illustration 2...
  • Page 13 Figure 2-4 Dimension illustration 3...
  • Page 14: Installation

    3 Installation 3.1 Device Installation Important Please make sure the installation surface can min support the 3X weight of the camera and the bracket. Please refer to the steps listed below. Figure 3-1 Device installation illustration 1 Figure 3-2 Device installation illustration 2 Step1 Use the inner hexagonal wrench (provided) to loose the three inner hexagon screws in the dome cover and then open the cover.
  • Page 15 Draw and then dig three plastic expansion bolts holes on ceiling or other installation surface and then insert three expansion bolts in the holes. Secure these three bolts firmly. Note: Please dig a “cable exit hole” in the surface according to the installation position map if you want to draw out the cable from the top of the installation surface.
  • Page 16: Micro Sd Card Installation

    Figure 3-3 Device installation illustration 3 3.2 Micro SD Card Installation Important Some series products do not support the Micro SD card storage function. Please shut down the power and then turn off the device before you install the Micro SD card. Step 1 Please refer to the step 1 in chapter 3.1 to open the device.
  • Page 17 Figure 3-4 Device installation illustration 4...
  • Page 18: Quick Configuration Tool

    4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”...
  • Page 19 In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.
  • Page 20: Web Operation

    5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. ...
  • Page 21 Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...
  • Page 22: Faq

    6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device. factory default setup. Micro card Do not set the Micro SD card as the storage media to storage the write times schedule record file.
  • Page 23: Appendix Toxic Or Hazardous Materials Or Elements

    Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component Device ○ ○ ○ ○ ○ ○ Construction Material ○ ○ ○ ○ ○...

Table of Contents