Problem solving guide
Problem
The oven does not heat
up.
"Power cut - Process
cancelled" appears in
the display.
12:00 appears in the
display.
The message
"Maximum operating
duration reached"
appears unexpectedly
in the display.
"Fault: F 32" appears in
the display.
118
Possible cause and remedy
^ Check whether the demo mode has been activated
(see "Settings - Showroom programme").
If demo mode has been switched on the oven can be
operated but it will not heat up.
^ Deactivate demo mode.
There has been a power cut which has caused a
current process to stop.
^ Switch the oven off and then back on again.
Start the cooking programme again.
The power supply was interrupted for longer than 200
hours.
^ Reset the time and date.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Touch the OK sensor. Touch # to clear the message
"Process finished" from the display. The oven can
then be used again as normal.
The Pyrolytic cleaning programme door lock is not
locking.
^ Switch the oven off and then back on again.
Then restart the Pyrolytic cleaning programme.
If the fault code appears in the display again call the
Miele Service Department.