Table of Contents
Advertisement
Cleaning and care
Y Close the door.
Z Touch the OK sensor.
The Evaporate residual moisture
process will then start.
Steam can cause scalding injuries.
Do not open the door during the
evaporation process.
The oven heating will switch on and the
duration for the evaporation process
will count down in the display.
During the evaporation process, the
duration may be adjusted by the
system according to how much water is
currently present.
At the end of the evaporation process a
message will appear in the display with
advice on cleaning after running the
descaling programme.
[ Touch the OK sensor.
A buzzer will sound if the buzzer is
switched on (see "Settings - Volume -
Buzzer tones"),
"Process finished" will appear in the
display.
\ Switch the oven off.
116
,
Danger of burning.
Allow the oven interior and
accessories to cool down before
cleaning them.
] Remove the universal tray and empty
it. Clean the oven interior to remove
any condensation and descaling
agent residue.
Leave the oven door open until the
oven interior is completely dry.
Advertisement
Table of Contents
