Table of Contents
Advertisement
Problem
The "Start at" and
"Ready at" functions
have not worked.
The oven lighting is
not working.
F and a number
appear in the
display.
F 44
F ..
Other fault codes
Possible cause and remedy
These functions will not work for the "Descaling"
programme.
The temperature in the oven is too high, e.g. after a
programme has finished.
^ Open the door and let the oven cool down.
The lamp is defective.
Call Miele Service to have the lamp replaced.
Communication fault
^ Switch the appliance off and then back on again after a
few minutes.
If the fault code appears in the display again call Miele
Service.
Technical fault
^ Switch the appliance off and call Miele Service.
Problem solving guide
103
Advertisement
Table of Contents
