Repairing Phoenix Installation - Nokia RM-42 Service Manual

Nokia Customer Care
3. If the operating system does not require rebooting, click Finish to complete.
If the operating system requires rebooting, InstallShield Wizard will notify you. Select Yes... to reboot the PC
immediately and No... to reboot the PC manually afterwards.

Repairing Phoenix installation

Context
If you experience any problems with the service software or suspect that files have been lost, you can use the
repair function before completely reinstalling Phoenix.
Note: The original installation package (for example, phoenix_service_sw_a15_2004_24_7_55.exe) must
be found on your PC when you run the repair setup.
Steps
1. Open Windows Control Panel → Add/Remove Programs .
2. Select Phoenix Service Software → Change/Remove .
Page 3–10
Figure 8 Finish uninstallation
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Service Software Instructions
9241872 (Issue 1)
RM-42