Cutting Attachment
STIHL is the only manufacturer in the
industry to produce its own chain saws,
guide bars, saw chains and chain
sprockets.
A cutting attachment consists of the saw
chain, guide bar and chain sprocket.
The cutting attachment that comes
standard is designed to exactly match
the chain saw.
1
a
The pitch (t) of the saw chain (1),
–
chain sprocket and the nose
sprocket of the Rollomatic guide bar
must match.
The drive link gauge (2) of the saw
–
chain (1) must match the groove
width of the guide bar (3).
If non-matching components are used,
the cutting attachment may be damaged
beyond repair after a short period of
operation.
MS 192 T, MS 192 TC
Chain Scabbard
Your saw comes standard with a chain
scabbard that matches the cutting
attachment.
If guide bars of different lengths are
2
mounted to the saw, always use a chain
scabbard of the correct length which
covers the complete guide bar.
3
The length of the matching guide bars is
marked on the side of the chain
scabbard.
Mounting the Bar and Chain
Releasing the chain brake
4
Pull the hand guard (4) toward the
N
control handle until there is an
audibleclick – the chain is
disengaged.
Removing the chain sprocket cover
6
5
Unscrew the nut (5) and remove the
N
cover (6).
English
11