Operation - Oki c3530 User Manual

4.
O
PERATION
1.
2.
Downloaded From ManualsPrinter.com Manuals
Margin shift - right: This sets the amount to shift the
document image to the right.
NOTE:
Any parts of the image that do not fit on the paper as a result
of this setting, are not printed. The setting displayed, mm or
inch, depends on the setting in Admin Setup - System Setup
- Unit of Measure in Menu Mode. If Margin Shift-Right is set
to other than "0 mm" or "0.00 in," Edge Erase always defaults
to "0mm (0.00in)" and Reduce/Enlarge can be set only to less
than 100%.
Select from: 0.00 in, 0.25 in, 0.50 in, 0.75 in, 1.00 in
or
0 mm, 6 mm, 13 mm, 19 mm, 25 mm
Margin shift - bottom: This sets the amount to shift the
document up.
NOTE:
Any parts of the image that do not fit on the paper as a result
are printed. The setting displayed, mm or inch, depends on
the setting in Admin Setup - System Setup - Unit of Measure
in Menu Mode.
If Margin Shift-Right is set to other than "0 mm" or "0.00 in,"
Edge Erase always defaults to "0mm (0.00in)" and Reduce/
Enlarge can be set only to less than 100%.
Select from: 0.00 in, 0.25 in, 0.50 in, 0.75 in, 1.00 in
or
0 mm, 6 mm, 13 mm, 19 mm, 25 mm
Press the Left arrow key to return to the start menu.
Place your document(s) with the text face Up in the ADF
or face Down on the glass (as described above).
If you wish to make one copy of the document(s), simply
press the Start button (monochrome or color option).
C3530 MFP User's Guide
Operation > 60