Oki c3530 User Manual page 128

10.
11.
12.
Memory insert.jpg
Downloaded From ManualsPrinter.com Manuals
As the RAM expansion slot already contains a memory
board (64Mb), this board will have to be removed before
you can install the new one. To remove it proceed as
follows:
(a) Identify the locking clips at each end of the RAM
expansion slot.
(b) Push the clips outward and back into the printer. The
board will pop out slightly.
(c) Grip the board firmly by its short edges and pull it
out of the slot.
(d) Place the removed memory board in the antistatic
bag which originally contained the new memory
board.
Hold the new memory board by its short edges, so that
the edge connector faces in towards the RAM expansion
slot, and the small cutout is closer to the bottom of the
printer.
Gently push the board into the RAM expansion slot until it
latches in and will not go any further.
C3530 MFP User's Guide
Installing additional memory > 128