Setting The Cooking Time; Setting A Later End Time - Siemens HB36GB.60 Instruction Manual

Cancelling the timer time
Press the button to open the menu. Turn the timer time back
0
to : . Press the button repeatedly until the
‹ ‹‹ 0
symbol disappears from the clock display.
Changing the timer time
Open the menu with the
0
to change the time. Press the
rotary symbol disappears from the clock display. The menu is
exited. The new time counts down.

Setting the cooking time

If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for
180 °C, cooking time of 45 minutes.
Press the button twice.
0
1.
The arrow is next to the
The rotary symbol above the two dots indicates that the
Î
cooking time can be set using the rotary selector.
Set the cooking time using the rotary selector
2.
Press the button repeatedly until the
0
3.
disappears from the clock display.
The setting is adopted
If the operation has not yet started, press the
4.
will see the cooking time counting down on the clock display.
The cooking time has elapsed
A signal sounds. The oven stops heating.
the clock display. You can cancel the audible signal earlier by
pressing the 0 button.
Cancelling the cooking time
Use the 0 button to select the
rotary selector to reset the cooking time to
button repeatedly until the
the clock display.
Changing the cooking time
Use the 0 button to select the
cooking time using the rotary selector. Press the
repeatedly until the Î rotary symbol disappears from the
clock display. The modified cooking time can be seen counting
down.
12
Î
button and use the rotary selector
button repeatedly until the
0
top/bottom heating,
%
symbol for the cooking time.
Nx
rotary symbol
Î
† button. You
‹ : ‹‹ is shown on
Nx cooking time. Use the
‹ : ‹‹ . Press the
Î rotary symbol disappears from
Nx cooking time. Change the
0
Calling up the clock, cooking time and end time
You can call up all the functions with the
rotary

Setting a later end time

A later end time can be set for
all types of heating
■
Î
a variety of programmes
■
and the cleaning system
■
Example: you put the dish in the cooking compartment at 9.30.
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. Cooking starts at
12.00 and finishes at 12.45.
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Setting a later end time
Prerequisite: a cooking time must be set. Operation must not
have started.
Use the
0
1.
The end time appears. This is the time at which the meal will
be ready.
Using the rotary selector, set a later end time.
2.
Press the
3.
disappears from the clock display.
Press the
4.
The oven goes into standby. The
time that has been set is shown on the clock display. As soon
as operation starts, you will see the cooking time counting
down.
The cooking time has elapsed
A signal sounds. The oven stops heating.
clock display. You can stop the audible signal by pressing
0
the button.
0
Correcting the end time
This is only possible as long as the oven is in standby. Use
the button to select the
0
using the rotary selector. Press the
button
the rotary symbol disappears from the clock display. The
Î
new end time is applied.
button to select the
Ny
button repeatedly until the
0
button.
†
button lights up. The end
†
end time. Adjust the end time
Ny
0
clock button.
0
end time.
rotary symbol
Î
: is shown on the
‹ ‹‹
button repeatedly until