Replacing The Computer Handle - Lenovo ThinkCentre M700 Maintenance Manual

7. Align the three plastic tabs on the right side of the front bezel with the corresponding holes in the
chassis. Then, pivot the front bezel inward until it snaps into position.
Figure 26. Installing the front bezel
8. Reinstall the dust shield if you have removed it. Align the edges of the dust shield with the edges of the
front bezel. Then, press the dust shield inward until it snaps into position.
Figure 27. Installing the dust shield
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 122.

Replacing the computer handle

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
To replace the computer handle, do the following:
96
ThinkCentre M700 Hardware Maintenance Manual