Sharp AL-1215 Service Manual page 7

Section, item
Optical section Scanning
section
Writing
section
Image forming
Fusing section
Electrical section
*1) May fluctuate due to environmental conditions and the input voltage.
Scanning system
CCD sensor Resolution
Lighting lamp Type
Voltage
Power consumption
Output data
Writing system
Laser unit Resolution
Photoconductor type
Life
Charger Charging system
Transfer system
Separation system
Developing Developing system
Cleaning Cleaning system
Fusing system
Upper heat roller type
Lower heat roller type
Heater lamp type
Voltage
Power consumption
Power source Voltage
Frequency
Power consumption Max.
Average
(during copying)
Average (stand-by)
Pre-heat mode
Auto power shut-off mode
AL-1551CS SPECIFICATIONS 2 - 2
Details
3 CCDs (RGB) sensor scanning by lighting white lamp
600 dpi
CCFL
560Vrms
2.8W
R, G, B 1 or 8 bits/pixel / A/D 16bit
Writing to OPC drum by the semiconductor laser
600 dpi
OPC (30ø)
18k
Saw -tooth charging with a grid, / (-) scorotron
discharge
(+) DC scorotron system
(-) DC scorotron system
Dry, 2-component magnetic brush development system
Counter blade system (Counter to rotation)
Heat roller system
Teflon roller
Silicon rubber roller
Halogen lamp
100V
800W
100V, 110V, 120/127V, 230V, 240V
Common use for 50 and 60Hz
Less than 1000W
AL-1215 300 Wh/H *1)
AL-1530CS 300 Wh/H *1)
AL-1540CS 300 Wh/H *1)
AL-1551CS 310 Wh/H *1)
~ 127V 80Wh/H *1), 230V, 240V 75Wh/H *1)
~ 127V 16.5Wh/H *1), 230V, 240V 18Wh/H *1)
~ 127V 80Wh/H *1), 230V, 240V 75Wh/H *1)