Sharp AL-1215 Service Manual page 62

B. Cassette detection switch
1) Remove the pawl.
2) Remove the cassette detection switch.
3) Remove the harness.
1
3
2
C. Paper feed solenoid
1) Remove the screw.
2) Remove the connector.
3) Remove the paper feed solenoid.
D. Transport roller
1) Remove two E-rings.
2) Remove the transport roller.
1
A
B
* Install so that the earth spring A is brought into contact over bearing
B.
2
3
1
4
2
AL-1551CS DISASSEMBLY AND ASSEMBLY 8 - 22
E. Paper feed clutch
1) Remove the E-ring.
2) Remove the paper feed clutch.
3) Remove the parts.
* When installing, fit the cut surface A.
F. 2nd paper feed roller
1) Remove the E-ring and the parts.
2) Remove the 2nd paper feed roller.
1
D
3
* When installing, hang the 2nd connection arm on the 2nd connection
arm Spring B. Be sure to install so that the earth spring C is in
contact under the bearing D.
3
B
2
C
A
2
1
A
1