Rear Frame Section - Sharp AL-1215 Service Manual

D. Pressure plate holder attachment
1) Attach the pressure plate holder so that the resin section is not
covered with the seal M1-N.
Seal M1-N
Attachment
reference
Attachment
reference

7. Rear frame section

A. List
No. Part name Ref.
1 Mirror motor
2 Main motor
3 Exhaust fan motor
B. Disassembly procedure
1) Remove four screws, and remove the rear cabinet and the rear
cabinet cover.
1)
Pressure plate
holder
1)
1)
2)
1)
AL-1551CS DISASSEMBLY AND ASSEMBLY 8 - 17
2) Disconnect the connector.
3) Remove two screws, and remove the scanner motor.
4) Remove two screws and one harness, and remove the main
motor.
5) Remove two screws and one connector, and remove the exhaust
fan motor.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
1)
3)
2)
3)
1)
2)
1)
3)
2)