Advertisement
Mounting ST101-SR
The ST101-SR package includes mounting rails (optional) that can be used for mount-
ing the system on the wall.
1. If
r ubber
feet
previously attached at the
bottom of the system, please
remove them first.
2. The mounting holes are located
at the bottom of the system.
Mount the mounting rails on each
side of the system using the
provided mounting screws.
3. Mount the whole system on the
wall by fastening screws through
the rail's mounting holes.
Note:
The pictures in this document are for illustration only. The system board and all
other components may differ depending on the configuration you have purchased.
Please refer to the provided CD for details relevant to the system board.
has
been
Mounting rail
Rail's mounting hole
Rail's mounting hole
8/9
Mounting rail
Rail's mounting hole
Rail's mounting hole
Advertisement
