Advertisement
3. After fastening the screws, on the
same side of the bracket (top
side), position the optical drive as
shown on the right.
4. Secure the optical drive by
fastening screws on each side of
the drive bay bracket.
5. These cables are used to connect
the SATA and optical drives to
the system.
Rear view of the optical drive
SATA
Optical drive
40-pin IDE data cable
(for optical drive)
SATA power cable
(for SATA drive)
4/9
IDE data
connector
IDE power
connector
Optical drive
SATA
SATA data cable
(for SATA drive)
Advertisement
