Advertisement
9. Connect the other end of the
SATA data cable to the SATA
drive.
Connect the other end of the
SATA power cable to the power
connector at the rear of the SATA
drive.
10. Turn the drive bay bracket to the
top side. Insert the IDE power
cable (from the system's power
module) and the other end of
the IDE data cable through the
bracket's hole, up to the top side
of the bracket.
Connect the IDE power cable to
the power connector at the rear
of the optical drive.
11. Connect the other end of the
IDE data cable to the IDE
connector at the rear of the
optical drive.
SATA power cable
IDE data cable
6/9
SATA data cable
IDE
power
cable
IDE
data
cable
Advertisement
