Advertisement
12. Insert the drive bay bracket from
the side of the system.
13. Secure the drive bay bracket by
fastening the screws you
removed earlier.
14. Replace the chassis cover and
secure it with the screw you
removed earlier.
15. Insert the provided power cord
holder. This will prevent the cord
from falling off easily or detach-
ing from the system.
16. When you power up the system, configure the drives in the BIOS. Refer to the sys-
tem board manual in the provided CD.
17. Refer to the manual or documentation enclosed with the drives for additional infor-
mation on using the drive.
Power cord
holder
7/9
Insert holder here
Advertisement
