HP rp5800 Reference Manual page 34

Hide thumbs Also See for rp5800:

Table of Contents

Before installing the expansion card, remove the expansion slot cover in the lower slot. The

Powered Serial Port expansion card must be installed in the lower slot.

Figure 2-25

10.

Install the Powered Serial Port expansion card into the bottom socket on the riser card. Move the

card toward the rear of the chassis so that the bracket on the card is aligned with the open slot

on the rear of the chassis (1). Press the card straight down into the expansion socket on the

riser card (2).

NOTE:

riser card. The bottom socket is designed specifically for that card. DO NOT attempt to install

any other card in the bottom socket.

Figure 2-26

Chapter 2 Hardware Upgrades

Removing an Expansion Slot Cover

The Powered Serial Port expansion card must be installed in the bottom socket on the

Installing the Powered Serial Port Expansion Card in the Riser Card

ENWW

Table of Contents

Show Quick Links

Table of Contents