PhaseOne P 65+ User Manual page 48

Disk Checking
Disk Checking is done per default on every card inserted to the P 65+.
If for some reason this check is not wanted the feature can be turned
off in this menu.
Phase One recommends leaving Disk Checking turned on, to maximize
data security on the memory cards.
Read more about the Phase One Secure Storage System in Chapter 5
of this manual.
Camera Mode
Camera mode is used in special applications only. This could be in
combination with a specific electronic shutter or in an industrial
application, where the timing differs from a normal photographic
application.
Please consult the documentation included with these solutions, to find
out which mode to use.
If you are using the P 65+ back in a normal photographic application
using medium format camera or technical camera as described in this
manual, please leave this setting in "Normal" position.
Mode 1 = Electronic shutter option
Mode 2 = Aerial setup; - You will be asked to use it by the manufacturer
of your aerial solution if this mode is needed. It makes it possible to
disable black calibration with an electric signal on the multi-connector
port, and also to disable auto rotation in the same way.
Mode 3 = Available on V model; this is a specialized industrial mode,
not for usage on regular photographhic equipment - request information
separately.
48