Iso Sensitivity - Sanyo VPC-CG6EX Instruction Manual

ISO SENSITIVITY

With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
1
Display PAGE 2 of the RECORDING MENU (page 60).
2
Select the ISO sensitivity menu.
t: Sets the ISO sensitivity automatically (equivalent to ISO 50 to 400
*: Sets the sensitivity to ISO 50 equivalent
u: Sets the sensitivity to ISO 100 equivalent
v: Sets the sensitivity to ISO 200 equivalent
w: Sets the sensitivity to ISO 400 equivalent
6: Sets the sensitivity to ISO 800 equivalent
-: Sets the sensitivity to ISO 1600 equivalent
3
Select the desired icon from the ISO sensitivity menu, and press the
SET button.
h This completes the ISO sensitivity setting.
HINT
i By setting a higher ISO sensitivity, you can set higher shutter speeds and
capture images in darker locations, but noise in the captured images may
increase.
i By assigning an operation shortcut to the SET button (page 132), you can
change the ISO setting from the Shooting Screen.
CAUTION
Does the image appear to flicker when recording a video clip?
i If recording a video clip under fluorescent lights with the ISO sensitivity set
to w or higher, a noticeable flicker may appear in the image.
Downloaded From VideoCamera-Manual.com Manuals
[video clip recording mode: ISO 450 to 3600]).
(video clip recording mode: ISO 450).
(video clip recording mode: ISO 900).
(video clip recording mode: ISO 1800).
(video clip recording mode: ISO 3600).
(video clip recording mode: ISO 3600).
(video clip recording mode: ISO 3600).
80
English