Sanyo VPC-CG6EX Instruction Manual page 176

Monitor
Viewing
images
Downloaded From VideoCamera-Manual.com Manuals
Question
When used in
cold weather, why
does the image
seem to leave
traces as it
moves?
Why does the
displayed image
contain some red,
blue and green
dots, or why are
black spots
visible?
Why is the image
too bright?
Why is the image
out of focus?
Why is there no
image (z is
shown)?
Answer
Phenomenon due
to the nature of
the monitor.
The subject was
too bright.
The focus is not
locked properly.
This may happen
when trying to
play back images
stored on a card
from a different
digital camera.
Action
Not a malfunction.
Spots that appear in
the monitor only
appear in the
monitor and will not
be recorded with the
images.
When capturing an
image, devise a way
to compensate for a
bright subject, for
example, by
changing the
shooting angle.
Hold the camera
correctly and slowly
press the [ ]
button halfway to
lock the focus. Then
press the [ ]
button all the way to
capture the image.
Play back images
that were recorded
on a card using this
camera.
162
English