Iso Sensitivity - Sanyo Xacti VPC-S70EX Instruction Manual

ISO SENSITIVITY

With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
1
Display the Recording Menu (page 53).
2
Select "ISO" and press the SET button.
h The ISO sensitivity menu appears.
t: Sets the ISO sensitivity automatically (corresponds to ISO 50 to
400 [video clip recording mode: corresponds to ISO 450 to 1,800]).
*: Sets the sensitivity to ISO 50 (video clip recording mode:
corresponds to ISO 450).
u: Sets the sensitivity to ISO 100 (video clip recording mode:
corresponds to ISO 900).
v: Sets the sensitivity to ISO 200 (video clip recording mode:
corresponds to ISO 1,800).
w: Sets the sensitivity to ISO 400 (video clip recording mode:
corresponds to ISO 3,600).
6: Sets the sensitivity to ISO 800 (video clip recording mode:
corresponds to ISO 7,200).
h The indicated ISO value when capturing still images is the standard
output sensitivity
3
Select the desired icon, and press the SET button.
h The ISO sensitivity is set.
HINT
i By setting a higher ISO sensitivity, you can set higher shutter speeds and
capture images in darker locations, but noise in the captured images may
increase.
CAUTION
Does the image appear to flicker when recording a video clip?
i If recording a video clip under fluorescent lights with the ISO sensitivity set
to w or higher, a noticeable flicker may appear in the image.
Downloaded From camera-usermanual.com Sanyo Manuals
61
English