USING THE ZOOM
Your camera has two zoom functions: optical zoom and digital zoom.
You can specify whether or not the digital zoom is enabled (page 131).
1
Point the camera lens at the
subject.
2
Push the zoom switch toward the
[T] or [W] side to compose the
desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is moved,
the zoom bar appears on the
monitor.
h When the optical zoom factor is at
maximum, zooming stops
temporarily. When the zoom
switch is pressed toward the [T]
side again, the mode changes to
the digital zoom mode and
zooming continues.
3
Take the picture.
For video clip recording, see page 41.
For shooting still images, see page 45.
Downloaded From VideoCamera-Manual.com Manuals
57
English
Zoom switch
Monitor
When both optical
and digital zoom
are enabled
Optical zoom
Digital zoom (yellow)
When optical zoom
only is enabled
Zoom bar
Pointer