Using The Stabilizer; Setting The Zoom Control - Sanyo  Instruction Manual

Using the Stabilizer

The Stabilizer function works according to the luminance of the target object. This function uses special
image data processing for getting high sensitivity of CCD. High sensitivity can use higher shutter speed
compared with normal mode, so it reduces influence of hand shaking. Press the stabilizer button before
pressing the Shutter button.
To activate Stabilizer
• Press the Stabilizer button on top of your
camera to enable/disable stabilizer.
If Stabilizer is enabled, the stabilizer icon is
displayed on the LCD monitor and the ISO setting
is automatically set to Auto. See "ISO" on page 26
for more details.

Setting the Zoom Control

Using a combination of 4 times optical zoom and 5 times digital zoom permits zoom photography at up to
20 times magnification. While the digital zoom can be a useful feature, the more an image is enlarged
(zoomed), the more pixelated (grainier) the image will appear. Please refer to "Setting the Digital Zoom"
on page 41 on how to setup digital zoom.
To adjusts the optical zoom:
1. Press the Zoom buttons to zoom in or zoom out an image.
2. The zoom indicator appears on the LCD monitor.
Zoom buttons
1. Press the "T" button to zoom in.
2. Press the "W" button to zoom out.
To adjusts the digital zoom:
1. Activate digital zoom. See "Setting the Digital Zoom" on page 41.
2. Press the Zoom buttons to optically zooms in/out to the maximum until it stops.
3. Release the Zoom buttons.
Optical zoom 1X to 4X
Digital zoom is not activated in recording videos
Stabilizer button
Digital zoom 1X to 5X
22
Stabilizer on