Handling Precautions - Canon IMAGERUNNER C2220i User Manual

•
When the Color Image Reader Unit-G1, Booklet
Finisher-M1, 3 Way Unit-C1, and Buffer Pass
Unit-K1 are attached:
100 mm or more
If your machine is the imageRUNNER ADVANCE C2230i/C2225i/
C2220i, the machine's width will become 1,139 mm.

Handling Precautions

•
Do not attempt to disassemble or modify the
machine.
• Some parts inside the machine are subject
to high-voltages and temperatures. Take
adequate precautions when inspecting the
inside of the machine. Do not carry out any
inspections that are not described in the
manuals for this machine.
•
Be careful not to spill liquid or drop any
foreign objects, such as paper clips or staples
inside the machine. If a foreign object comes
into contact with electrical parts inside the
machine, it might cause a short circuit and
result in a fire or electrical shock.
1
1,892 mm
•
If there is smoke, or unusual noise,
immediately turn the main power switch OFF,
disconnect the power cord from the power
outlet, and then call your local authorized
Canon dealer. Using the machine in this state
may cause a fire or electrical shock. Also, avoid
placing objects around the power plug so that
the machine can be disconnected whenever
necessary.
•
Do not turn the main power switch OFF or
open the front covers while the machine is in
operation. This may result in paper jams.
•
Do not use flammable sprays, such as spray
glue, near the machine. There is a danger of
ignition.
•
This machine generates a slight amount
of ozone etc. during normal use. Although
sensitivity to ozone etc. may vary, this
amount is not harmful. Ozone etc. may be
more noticeable during extended use or
long production runs, especially in poorly
ventilated rooms. It is recommended that the
room be appropriately ventilated, sufficient to
maintain a comfortable working environment,
in areas of machine operation.
Preface 19