Cadillac ATS 2017 Owner's Manual page 62

To store exit positions and easy exit
features to the (Exit) button,
repeat Steps 1 4 using
your positions for getting out of the
vehicle.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
manually recall the previously stored
memory positions. Releasing 1, 2,
or before the stored positions are
reached stops the recall.
Automatically Recalling Memory
Positions (Auto Memory Recall)
If programmed in the vehicle
personalization Menu, the Auto
(Automatic) Memory Recall feature
automatically recalls the current
driver s previously stored 1 or 2
position when the ignition is changed
from off to ON/RUN or ACC/
ACCESSORY.
The transmission must be in P (Park),
or the parking brake must be set for a
manual transmission.
See Vehicle Personalization 0 147.
To stop recall movement, press one of
the memory, driver seat, outside
mirror, or power tilt and telescoping
to store
steering column controls.
RKE transmitters are not labeled with
a number. If your memory seat
position is stored to 1 or 2 but this
position is not automatically recalling,
then store your positions to the other
(Exit) to
button or switch RKE transmitters
with the other driver.
If the vehicle s driver has changed, in
some vehicles the Driver ID may be
displayed for the first few ignition
cycles.
Easy Exit Recall
If programmed on in the vehicle
personalization menu, the Easy Exit
feature recalls the previously stored
(Exit) positions when leaving the
vehicle. See Storing Memory
Positions listed previously. See also
Vehicle Personalization 0 147.
Easy Exit recall automatically
activates when one of the following
occurs:
SEATS AND RESTRAINTS
The vehicle is turned off and the
driver door is opened within a
short time.
The vehicle is turned off with the
driver door open.
Obstructions
If something has blocked the driver
seat while recalling a memory
position, the recall may stop. Remove
the obstruction. Then do one of the
following:
If automatically or manually
recalling the stored memory
position, press and hold the
appropriate manual control for
two seconds. Try recalling again
by pressing the appropriate
memory button, then try recalling
again by opening the driver door
and pressing on the RKE
transmitter.
If recalling the exit position, press
and hold the appropriate manual
control for the exit feature not
recalling for two seconds. Then try
recalling the exit position again.
If the memory position is still not
recalling, see your dealer for service.
61