Cadillac ATS 2017 Owner's Manual page 187

186 INFOTAINMENT SYSTEM
Pair cell phone(s) to the vehicle.
The system may not work with all
cell phones. See Pairing in this
section.
If the cell phone has voice dialing
capability, learn to use that
feature to access the address book
or contact list. See Voice
Pass-Thru in this section.
See Storing and Deleting Phone
Numbers in this section.
Warning
When using a cell phone, it can be
distracting to look too long or too
often at the screen of the phone or
the infotainment system. Taking
your eyes off the road too long or
too often could cause a crash
resulting in injury or death. Focus
your attention on driving.
Vehicles with a Bluetooth system can
use a Bluetooth-capable cell phone
with a Hands-Free Profile to make and
receive phone calls. The infotainment
system and voice recognition are used
to control the system. The system can
be used while in ON/RUN/START or
ACC/ACCESSORY. The range of the
Bluetooth system can be up to 9.1 m
(30 ft). Not all phones support all
functions and not all phones work
with the Bluetooth system. For U.S.
only, see www.gm.com/bluetooth for
more information about compatible
phones.
Bluetooth Controls
Use the buttons on the faceplate and
the steering wheel to operate the
Bluetooth system.
Steering Wheel Controls
: Press to answer incoming calls
and start voice recognition.
: Press to end a call, reject a call,
or cancel an operation. Press to mute
or unmute the infotainment system.
Infotainment System Controls
For information about how to navigate
the menu system using the
infotainment controls, see
Overview 0 168.
MENU : Turn to scroll through the
phone menu, including Contacts,
Recent Calls, Keypad, and Bluetooth
Devices. Press to select an entry and
dial when appropriate.
{
: Press to go to the Home Page. See
Home Page 0 169.
PHONE : Press to enter the phone
main menu. See Bluetooth
(Infotainment Controls) 0 187 or
Bluetooth (Voice Recognition) 0 191 or
Bluetooth (Overview) 0 185.
Voice Recognition
The voice recognition system uses
commands to control the system and
dial phone numbers.
Noise : The system may not recognize
voice commands if there is too much
background noise.
When to Speak : A tone sounds to
indicate that the system is ready for a
voice command. Wait for the tone and
then speak.
How to Speak : Speak clearly in a
calm and natural voice.