Controls) - Cadillac ATS 2017 Owner's Manual

Audio System
When using the Bluetooth system,
sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
knob during a call to change the
volume level. The system maintains a
minimum volume level.
Bluetooth Audio Quality
Turn off the Echo and Noise
cancellation feature on your phone,
if supported, for the best hands-free
performance.
For U.S. only, see www.gm.com/
bluetooth for more information.
Other Information
®
The Bluetooth word mark and logos
are owned by the Bluetooth
and any use of such marks by General
Motors is under license. Other
trademarks and trade names are those
of their respective owners.
Bluetooth (Infotainment

Controls)

For information about how to navigate
the menu system using the
infotainment controls, see
Overview 0 168.
Switching to Handset or
Handsfree Mode
To switch between handset mode, use
the OnStar command, Transfer call.
Pairing
A Bluetooth-enabled cell phone must
be paired to the Bluetooth system and
then connected to the vehicle before it
can be used. See your cell phone
manufacturer's user guide for
Bluetooth functions before pairing the
®
cell phone. If a Bluetooth phone is not
SIG, Inc.
connected, calls can be made using
OnStar Hands-Free Calling,
if available. See OnStar Overview 0 398.
Pairing Information
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
INFOTAINMENT SYSTEM
Pairing only needs to be
completed once, unless the pairing
information on the cell phone
changes or the cell phone is
deleted from the system.
Only one paired cell phone can be
connected to the Bluetooth system
at a time.
If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were newly paired
to the system. To link to a
different paired phone, see
Connecting to a Different Phone
later in this section.
Pairing a Phone or Device
1. From the Home Page, turn the
MENU knob to access the
PHONE screen button, then press
the MENU knob to select the
PHONE screen button. If a device
has been previously paired, the
main Phone menu will be shown.
If no devices have been paired,
Step 2 can be skipped.
187