Vehicle Messages; Battery Voltage And Charging; Messages - Cadillac ATS 2017 Owner's Manual

Hide thumbs Also See for ATS 2017:
Table of Contents

Advertisement

display. Shift immediately if the lights
are flashing. See Manual Mode 0 233
or Manual Transmission 0 235.
Care of the HUD
Clean the inside of the windshield to
remove any dirt or film that could
reduce the sharpness or clarity of the
HUD image.
Clean the HUD lens with a soft cloth
sprayed with glass cleaner. Wipe the
lens gently, then dry it.
HUD Troubleshooting
Check that:
Nothing is covering the HUD lens.
HUD brightness setting is not too
dim or too bright.
HUD is adjusted to the proper
height.
Polarized sunglasses are not worn.
Windshield and HUD lens are
clean.
If the HUD image is not correct,
contact your dealer.
The windshield is part of the HUD
system. If windshield replacement is
required, see Windshield
Replacement 0 312.
INSTRUMENTS AND CONTROLS

Vehicle Messages

Messages displayed on the DIC
indicate the status of the vehicle or
some action that may be needed to
correct a condition. Multiple messages
may display one after the other.
The messages that do not require
immediate action can be
acknowledged and cleared by pressing
SEL. The messages that require
immediate action cannot be cleared
until that action is performed. All
messages should be taken seriously
and clearing the messages does not
correct the problem.
The following are some of the vehicle
messages that may be displayed
depending on the vehicle content.
Battery Voltage and
Charging Messages
BATTERY SAVER ACTIVE
This message displays when the
vehicle has detected that the battery
voltage is dropping beyond a
reasonable point. The battery saver
system starts reducing features of the
135

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats-v 2017

Table of Contents