Cadillac ATS 2017 Owner's Manual page 193

192 INFOTAINMENT SYSTEM
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say Delete. The system asks for
which phone to delete.
4. Say the name of the phone to
delete.
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the order
in which all available cell phones were
paired. This may need to be repeated
depending on how many cell phones
have been connected.
1. Press . The system responds
Ready, followed by a tone.
2. Say Bluetooth.
3. Say Change phone.
If another cell phone is
found, the response will be
<Phone name> is now
connected.
If another cell phone is not
found, the original phone
remains connected.
Storing and Deleting Phone
Numbers
The following commands are used to
delete and store phone numbers.
Store : This command will store a
phone number or a group of numbers
as a name tag.
Digit Store : This command allows a
phone number to be stored as a name
tag by entering the digits one at
a time.
Delete : This command is used to
delete individual name tags.
Delete All Name Tags : This
command deletes all stored name tags
in the Hands-Free Calling Directory
and the Destinations Directory.
Using the Store Command
1. Press . The system responds
Ready, followed by a tone.
2. Say Store.
3. Say the entire phone number or
a group of digits all at once with
no pauses, then follow the
directions given by the system to
save a name tag for this number.
Using the Digit Store Command
If an unwanted number is recognized
by the system, say Correction at any
time to clear the last number.
To hear all of the digits recognized by
the system, say Verify at any time.
1. Press . The system responds
Ready, followed by a tone.
2. Say Digit Store.
3. Say each digit, one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say Store, and then follow the
directions given by the system to
save a name tag for this number.
Using the Delete Command
1. Press . The system responds
Ready, followed by a tone.
2. Say Delete.
3. Say the name tag you want to
delete.