Transmission); Shifting Into Park; Shifting Out Of Park - Cadillac ATS 2017 Owner's Manual

Hide thumbs Also See for ATS 2017:
Table of Contents

Advertisement

228
DRIVING AND OPERATING

Shifting Into Park

(Automatic Transmission)
To shift into P (Park):
1. Hold the brake pedal down and
set the parking brake.
See Parking Brake (Electric) 0 238
or Parking Brake (Manual) 0 240.
2. Move the shift lever into P (Park)
by holding in the button on the
shift lever and pushing the lever
all the way toward the front of
the vehicle.
3. Turn the ignition to LOCK/OFF.
4. Take the Remote Keyless Access
(RKE) transmitter with you.
Leaving the Vehicle with the
Engine Running (Automatic

Transmission)

Warning
It can be dangerous to leave the
vehicle with the engine running.
It could overheat and catch fire.
Warning (Continued)
It is dangerous to get out of the
vehicle if the shift lever is not fully
in P (Park) with the parking brake
firmly set. The vehicle can roll.
Do not leave the vehicle when the
engine is running. If you have left
the engine running, the vehicle can
move suddenly. You or others could
be injured. To be sure the vehicle
will not move, even when you are
on fairly level ground, always set
the parking brake and move the
shift lever to P (Park). See Shifting
Into Park (Automatic Transmission)
0 228. If you are towing a trailer,
see Driving Characteristics and
Towing Tips 0 276.
If you have to leave the vehicle with
the engine running, the vehicle must
be in P (Park) and the parking brake
set. After shifting into P (Park), try to
move the shift lever without first
pushing the button on the shift lever.
If you can, the shift lever was not
fully locked into P (Park).
Torque Lock (Automatic
Transmission)
Torque lock is when the weight of the
vehicle puts too much force on the
parking pawl in the transmission. This
happens when parking on a hill and
shifting the transmission into P (Park)
is not done properly and then it is
difficult to shift out of P (Park). To
prevent torque lock, set the parking
brake and then shift into P (Park). To
find out how, see "Shifting Into Park"
listed previously.
If torque lock does occur, the vehicle
may need to be pushed uphill by
another vehicle to relieve the parking
pawl pressure, so you can shift out of
P (Park).

Shifting out of Park

This vehicle is equipped with an
electronic shift lock release system.
The shift lock release is designed to
prevent movement of the shift lever
out of P (Park), unless the ignition is
in ON/RUN/START and the brake
pedal is applied.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats-v 2017

Table of Contents