Configuring Your Pc - Zte MF253 Getting Started

Indicator
SIG
3G/4G
LAN
NOTE:
The phone function needs the network support.
Buttons
Button
Reset
WPS

Configuring Your PC

Follow the following steps and figures for Windows XP to configure the Internet Protocol for
your connection.
NOTES:

Wireless Network Connection is used for Wi-Fi connection.

Local Area Connection is used for network cable connection.
1. Right-click My Network Places, and then select Properties.
4
State
Blue Blinking
Blue ON
Blue ON
Blue Blinking
OFF
Red
Blue Blinking
Blue Solid
Green Blinking
Green Solid
Green ON
Green Blinking
OFF
Description
Press this button for 5 seconds to restore factory default configurations.
Press this button to activate the WPS function.
Description
The phone is ringing.
The phone is in calling.
Signal strength is very good or good.
Signal strength is weak.
There is no signal.
The device is turned on but not
registered to the mobile network.
The device is connected to the LTE
network and data is being transferred.
The device is registered to the LTE
network.
The device is connected to the 3G
network and data is being transferred.
The device is registered to the 3G
network.
The LAN port is connected.
The LAN port is connected with data
transmission.
The network cable is not connected.