Menu Settings - Canon iPF685 User Manual

iPF685

Menu Settings

Menu Settings
Menu items are as follows.
The printer menu is classified into regular menu items available when no print job is in progress and menu during print-
ing items only available while printing is in progress. see "Printer Menu Operations."
Regular menu
Paper Menu
Ink Menu
Job Menu
Set./Adj. Menu
*1: Only displayed in the menu during printing. Not displayed in the regular menu.
For instructions on selecting menu items, see "Menu Operations."
For details on the displayed menu hierarchy, see "Menu Structure."
Paper Menu
The Paper Menu is not displayed during printing.
Load Paper
Eject Paper
Chg. Paper Type ( *1 )
Chg. Paper Size
ManageRemainRoll
Paper Details (The type of paper
is displayed here.)
( *1 )
User's Guide
Downloaded from ManualsPrinter.com Manuals
Not displayed
The same Ink Menu as normal is displayed.
The same Job Menu as normal is displayed.
A limited Set./Adj. Menu containing the following items is displayed.
• Adj. Fine Feed ( *1 )
•
Printer Info
Setting Item
Head Height
Skew Check Lv.
Cutting Mode
Cut Speed
Trim Edge First
➔
Menu during printing
P.449
➔
P.452
➔
Description, Instructions
Select either sheets or rolls and load the paper.
Choose this item before removing loaded paper.
Change the type of paper loaded. (See "Changing the Type of Pa-
per.")
P.378
➔
Change the size of paper loaded. (See "Specifying the Paper
Length.") (See "Paper Sizes.")
P.380
➔
Choose On to print a barcode at the end of a roll before you remove
it. The printed barcode can be used in managing the amount of roll
paper left. Choose Off if you prefer not to print the barcode.
(See "Keeping Track of the Amount of Roll Paper Left.")
Adjust the Printhead height. (See "Troubleshooting Paper Abrasion
and Blurry Images.")
P.580
➔
If you print on Japanese paper (washi) or other handmade paper
that has an irregular width, choose Loose for a higher skew detec-
tion threshold, or choose Off to disable skew detection. However, if
paper is loaded askew when detection is Off, note that paper jams
or Platen soiling may occur.
Specify whether or not to cut with the standard round-bladed cutter.
If you choose Automatic, the roll will be cut automatically using the
Cutter Unit, depending on the printer driver settings.
Select Eject to prevent printed documents from falling immediately
after printing such as when you wait for the ink to dry, etc. Manual
prints lines at the cut position instead of cutting after printing.
(See "Specifying the Cutting Method for Rolls.")
Choose the cutting speed. The preset selection represents the opti-
mal cutting speed for the type of paper. We recommend keeping the
preset cutting speed.
If you use adhesive paper, choosing Slow helps prevent adhesive
from sticking to the cutter and keeps the cutter sharp.
Selects whether or not to automatically cut the leading edge of the
roll paper when roll paper is loaded.
Menu Settings
P.448
P.362
➔
P.385
➔
P.388
➔
459