Connecting A Second Display - HP ProOne 400 G1 All-in-One Hardware Reference Manual

11. Rotate the bottom edge of the access panel down (2) and press it firmly onto the chassis until it
locks into place.
You will hear audible clicks as the latches click into place.
Figure 2-9
The computer is now ready to be mounted to a wall, monitor arm, or other mounting fixture.

Connecting a second display

The DisplayPort connector on the rear of the computer allows you to connect a second display to the
computer.
If you are adding a second display that has a DisplayPort connector, then no DisplayPort video
adapter is required. If you are adding a second display that does not have a DisplayPort connector,
you can purchase a DisplayPort video adaptor from HP for your configuration.
DisplayPort adapters and video cables are purchased separately. HP offers the following adapters:
●
DisplayPort to VGA adapter
●
DisplayPort to DVI adapter
●
DisplayPort to HDMI adapter
To connect a second display:
1. Turn off power to the computer and the second display that you are connecting to the computer.
Replacing the access panel
Connecting a second display 15