Floor Console Storage Area; Folding Tray; Second Row Center Console - Chevrolet 2009 Uplander Owner's Manual

Floor Console Storage Area

Your vehicle may have a storage compartment located
on the front console below the front cupholders. Pull
up and then forward on the handle to open the storage
compartment.

Folding Tray

Second Row Center Console

If your vehicle has the second row center console, use
the following procedure to remove or install the
console.
2-58
Your vehicle may be
equipped with folding
convenience trays located
between seats. To use
each tray lift up on
the handle located on its
front end, while pulling
up on the tray to lock it into
place. There are four
cupholders on each tray.
Removing the Center Console
1. Locate the attachment lever in an opening on the
rear of the console
2. Pull the attachment lever upward to release the
attachment hook.
3. Lift the console up to remove it from the vehicle.
Replacing the Center Console
CAUTION:
{
A second row center console that is not locked
into place properly can move around in a crash or
sudden stop. People in the vehicle could be
injured. Be sure to lock the console into place
properly when installing it.
1. Position the second row center console above the
forward floor attachments between the second row
bucket seats.
For information on installing the seats, see Bucket
Seats on page 1-7 or Captain Chairs on page 1-14.
2. Place the console's front hooks onto the forward
floor attachments.