Select Buttonhole Cut Length (Not On Sub-Class -10/01) - Pfaff 3119 Instruction Manual

Sewing
10 Select buttonhole cut length
.04
In general the cut length of the buttonhole is defined by the size of the knife installed.
With the "multiple cut" function it is possible to make larger buttonhole cut lengths.
+
-
Activate multiple cutting function and enter knife size.
+
-
+
-
Enter cut overlap
+
-
+
-
10 - 5
To avoid premature wear of the cutting equipment we recommend the use of a
knife matching the buttonhole length.
Switch on the machine.
Select the operational mode Input (LED in the key is off).
Select function group "200" with the corresponding plus/minus key.
200
+
Confirm the input with Enter.
-
Enter the code, see Chapter 11.03 Entering/altering the access code.
201
+
-
Select parameter "207" with the corresponding plus/minus key.
207
+
Switch on the multiple cutting function with the corresponding plus/minus keys (value
set at "II") and enter the value for the knife size, e.g. 16 mm
-
207 16,0
+
-
Select Parameter "208" with the corresponding plus/minus key.
208
+
With the corresponding plus/minus key select the cut overlap, e.g. 0.5 mm.
-
208
+
Conclude the parameter input by switching to operational mode Sewing (LED in the key
is on).
-
(not on sub-class -10/01)
+
-
+
-
I
+
-
II
+
-
0.0
+
-
0.5
+
-