Parameter Settings; Selecting And Altering Parameters - Pfaff 3119 Instruction Manual

Adjustment
13

Parameter settings

.50
All variable machine functions are listed in the parameter list (Chapter 13.50.02). An example of
how to select the parameters and how to alter the values is given below (Chapter 13.50.01).
13

Selecting and altering parameters

.50.01
Example: Switching on the needle thread monitor
+
-
+
-
+
-
13 - 57
Switch on the machine.
Switch to parameter input (LED in the key is not on).
Select the function group, e.g. "200" with the corresponding plus/minus key.
200
+
Confirm the input with Enter.
-
Enter the code, see Chapter 11.03 Entering/altering the access code.
201
+
With the corresponding plus/minus key enter e.g. parameter "205" (needle thread
monitor).
-
205
+
With the corresponding plus/minus key switch on the needle thread monitor.
-
205
+
End the input by switching to the sewing mode.
-
+
-
+
-
I
+
-
II
+
-