Canon ae1 Installation Procedures Manual page 42

10) In the case of a Finisher-AEl, mount the punch
lower front fixing plate 2 [I] to the foot at the front
of the finisher using a screw [2] (binding; M4 x 6).
2) Fit the face cover [ l ] that comes with the unit.
3) Connect the host machine and the puncher unit, and
secure it in place to the fixing plates (front, rear) us-
ing a stepped screw [2] (M4 x 5; 1 pc. each).
MEMO:
In the case of a Saddle Finisher-AE2, the punch
lower front cover fixing plate 2 comes mounted.
(Its shape is different from the punch lower front
cover fixing plate 2 of the Finisher-AEl .)
4) Mount the rear cover of the puncher unit using three
3. Connecting to the Host Machine
1) Remove the three screws [I], and detach the rear
cover [2] of the puncher unit.
screws.
5) Mount the punch lower front cover fixing plate 1
[I] to the punch lower front cover [2] using a screw
[3] (self-tapping; M4 x 12).
6) Mount the punch lower front extension cover [4] to
the punch lower front cover using a screw [S] (self-
tapping; M4 x 12).