Canon ae1 Installation Procedures Manual page 10

5) Take the finisher out of the bag and remove the tape 7) Remove the two fixing screws [I], and remove the
used outside the finisher.
2 tray fixings [2].
A
For the Saddle Finisher-AE2, do not peel off the
blind seal [I] from the saddle tray.
[?I
F-1-12
8) In the case of the Finisher-AEl, open the front door
[I]. In the case of the Saddle Finisher-AE2, open
the front cover [2].
6) Remove the cushioning material [I] (Styrofoam) of
<Saddle Finisher-AE2>
the tray.