Replacing The Speakers; Procedure; Post-Requisites - Alienware 15 R2 Quick Start Manual

Replacing the speakers

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1
Using the alignment posts, place the speakers on the computer base.
2 Route the speaker cable through the routing guides on the battery and
computer base.
3 Adhere the front AlienFX LED cable to the battery.
4
Connect the front AlienFX LED cable to the system board and secure it with
UPMIDIAS
the tape.
5 Connect the speaker cable to the system board.

Post-requisites

1 Follow the procedure from step 5 to step 11 in "Replacing the
2
Replace the solid-state
3 Replace the memory
4
Replace the base
70
Before working inside your
drives.
modules.
panel.
computer. For more safety best
computer.
palm rest".