Table of Contents
Advertisement
4. Slide the keyboard cable into the connector on the keyboard-controller board and close the latch to secure the cable.
5. Slide the touchpad cable into the connector on the keyboard-controller board and close the latch to secure the cable.
6. Slide the keyboard-backlight cable into the connector on the keyboard-controller board and close the latch to secure the cable.
7. Align the screw holes on the keyboard-controller board bracket with the screw holes on the keyboard-controller board and
palm-rest and keyboard assembly.
8. Replace the three screws (M1.6x1.5) that secure the keyboard-controller board bracket to the keyboard-controller board and
palm-rest and keyboard assembly.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
wireless
card.
4. Remove the battery.
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
32
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
