Replacing The Wireless Card; Procedure - Alienware 15 R2 Quick Start Manual

Replacing the wireless card

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

CAUTION: To avoid damaging the wireless card, do not place
any cables under it.
1
Align the notches on the wireless card with the tabs on the wireless-card
slot.
2
Slide the wireless-card at an angle into the wireless-card slot.
UPMIDIAS
3 Connect the antenna cables to the wireless card.
A label at the tip of the antenna cables indicates color scheme for the
wireless card supported by your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
4 Press the other end of the wireless card down and align the screw hole on
the wireless-card bracket with the screw hole on the system board.
34
Before working inside your
computer. For more safety best
computer.
Antenna-cable sticker
color
White
Black