Pyle PTCD8UBT Manual page 16

Recording to USB flash drive or SD card
AUX / record / radio recording to USB / SD:
1 Press the "ON" button to turn the unit on.
2 Connect the USB flash drive or SD card to the hard disk.
3 Set the function button (CD / USB SD / AUX-PH / TUNER / BT)
to "AUX-PH", "TAPE" or "TUNER" (depending on which medium you use).
4 Play back the recording at the point at which recording should begin.
5 Press the "RECORD / ERASE" button once to start recording:
If both a USB device and SD card is connected, press the "SKIP - SKIP + /" buttons to choose between the recording
to USB or SD card. Press the "RECORD / ERASE" button again to confirm and begin recording. If only one disk
(USB / SD card) is connected, press the "RECORD / ERASE" button once to start recording automatically. The
recording starts a little time delay, please be patient.
6 Press the "STOP" button to stop recording.
Then the label "END" on the display.
Recording from CD to USB / SD:
1 Press the "ON" button to turn the unit on.
2 Connect the USB flash drive or SD card to the hard disk.
3 Set the function button (CD / USB SD / AUX-PH / TUNER / TAPE) to "CD".
4 Play back the recording at the point at which recording should begin.
5 Press the "RECORD / ERASE" button to start recording. If both a USB device as well as an SD card is connected,
the name "ONE" appears on the LCD screen. Press the "SKIP - / SKIP + -" button to select the content you want
to record. It is a case between "ONE", "FOLDER" and "ALL" to distinguish ("ONE" is the current title, "FOLDER"
stands for the complete current folder and "ALL" stands for all the tracks on the CD). If you press the "RECORD /
ERASE button", the word "USB" starts to flash. Press "SKIP - / SKIP +" to want to allow you to choose to record
between devices (USB / SD Card). Press the "RECORD / ERASE button" to confirm your entry and start recording.
When only one USB device or SD card is connected, the recording will start directly after you have chosen
between "ONE", "FOLDER" and "ALL".
16