Table of Contents
Advertisement
Play a record
Remove the needle guard from (white plastic cover).
1
Press the "POWER" key to "ON".
2
Set the function button (CD / USB SD / AUX-PH / TUNER / BT) to "AUX-PH".
3
Gently open the dust cover.
Be careful not to pinch your fingers.
4
Select the speed.
5
Place the plate on the turntable.
If you want to listen to a panel of 45 rpm,
use the supplied adapter.
6
Slide the clip to the right to release the tone arm.
7
Lift the cue lever to lift the tone arm of the tonearm.
8
Move the tone arm gently to the edge of the data set (or the starting point of a track).
The turntable starts rotating.
12
Advertisement
Table of Contents
