Maintenance - Pyle PTCD8UBT Manual

Bluetooth Operation
●
Press the power button to turn on the device. Set the function button (CD/USB SD/AUX-PH/TUNER/BT) to "BT"
position, you can hear a "beep" sound to indicate the unit is ready for pairing.
Open your smart phone, search and select "ClassicAudio" in the list, and pair. You will hear a beep sound to
indicate successful connecting, and now you can play music on your phone as usual, and get better sound with
this unit.
NOTE:
1, Wireless distance is up to 10m.
2, Make sure no other Bluetooth device is nearby that may affect connection.
3, The default code is "0000" if needed.
Play AUX-IN
●
Press the power button to turn on the device. Set the function button (CD / USB SD / AUX-PH / TUNER / BT) to
"AUX-PH" ("AU" appears on the LCD). Connect external music devices via the AUX IN jack and using a 3.5mm
cable into the device. Almost all external devices are compatible with it.
LINE OUT jacks
●
With the "LINE OUT jacks" You can listen to the music of the device on your own amplifier.
Make sure that you connect the white plug to the white jack (left) and the red plug to the red jack (right).
Avoid condensation:
If the device (or a record / CD) is moved from a cold place to a warm place, or used after a sudden temperature
change, there is a risk of condensation. The vapor in the air could condense on the internal mechanism and lead
to faulty functions or does not work anymore. To prevent this, or if this is the case, leave the unit for an hour or
two on.

Maintenance:

Keep clean the turntable. If the surface of the machine is dirty, clean it with a soft cloth and / or use a mild,
diluted soap solution. Be sure to completely remove all liquids. Do not use thinner, benzine or alcohol as they
may damage the surface of the device. Let dry the surface of the device completely before you use it again.
18