Communication Server - Nortel SL-100 Product Manual

140 System configuration
Figure 64
Primary group - SuperNode system lineup
The second lineup of the primary group for a full-size SuperNode system
consists of the Meridian Cabinet Auxiliary Module phase 3 (MCAM3),
followed by three Meridian Cabinet Trunk Module-ISDN (MCTM-I) cabinets
and a system provisionable cabinet.
The third lineup of the primary group consists of the MCAM3, plus up to
eight Meridian Cabinet Line Modules (MCLMs) or up to ten Intelligent
Peripheral Equipment Cabinets (IPEC), or a combination of MCLMs and
IPECs, as needed.
All MCLM and IPEC cabinets of the third lineup are directly connected to
their respective MCTM-I in the second lineup by a single standard cable
for each Enhanced Line Module (ELM) that connects between the rear
bulkheads. All other cabling is self-contained within the lineups.
SuperNode SE system
The power source (CPDC, or MCAM3) determines the primary group lineup
configuration for a one-group SuperNode SE system serving up to 9000
lines (8 ccs per line) or a primary group (group 0) of a larger system.
Copyright © 2006, Nortel Networks
.

Communication Server 2100

Meridian SL-100 Product Guide
555-4001-103 20.01 Standard
SE09 20 October 2006
Nortel Networks Confidential