Cabinetized Power Distribution Center - Nortel SL-100 Product Manual

The Meridian SL-100 spares shelf assembly is configured in position 46
only when the storage shelf assembly is configured in position 31.
Storage shelf assembly insert
The storage shelf assembly insert provides storage for odd size circuit
cards. The shelf insert stores a maximum of 22 circuit cards. Two shelf
insert assemblies can be installed into the bottom storage shelf assembly
at location 03. One storage shelf assembly insert is placed in the left side
of the storage shelf assembly from the front and the second storage shelf
assembly insert in the left side of the storage shelf assembly from the rear
of the cabinet.
Line card storage chassis
A line card storage chassis is provided when line cards are configured. If
the system requires line cards and three or more networks, two line card
storage chassis should be provided.
Refer to
Figure 61
CMSS components

Cabinetized Power Distribution Center

The CPDC is a single cabinet used to distribute power to the cabinets in
the corresponding lineup. It provides DC power distribution and protection
and optional inverted AC power for endguard outlets. The CPDC is the first
cabinet in a lineup of up to 11 cabinets.
Copyright © 2006, Nortel Networks
.
Maintenance and administration cabinet modules 131
Figure 61 "CMSS components" (page 131)
Communication Server 2100
Meridian SL-100 Product Guide
555-4001-103 20.01 Standard
SE09 20 October 2006
for CMSS components.
Nortel Networks Confidential